EV type 1 to type 2 charging cable

Products

EV type 1 to type 2 charging cable

Short Description:

This EV type 1 to type 2 charging cable It is conform to the provisions and requirements of 62196-2 IEC 2010 SHEET 2-lle and SAE J1772 2010. Reliable materials, flame retardant, pressure resistance, abrasion resistance, impact resistance and oil resistance make it durable. The customized solution makes it look better. This product is special designed for electric vehicle charging, generally called a mode 3 EV charging cable used to connect EV charger and electric car. There are two types according to different car end plugs: Type1 cable and Type2 cable. This product has a unique integrated design and strong structure which can be used outdoor and in rainy environment. It could also withstand the crushing of a vehicle. The product is equipped unique temperature monitor system. To ensure the safe operation, it will automatically cut off the charging current when the temperature is over set value.


Product Detail

Product Tags

Introduction to using steps

Step 1
Take out EV charging cable

EV type 1 to type 2 charging cable3

Step 2
Plug into charging station outlet

EV type 1 to type 2 charging cable4

Step 3
Plug into the car charging port

EV type 1 to type 2 charging cable5

Step 4
Start charging

EV type 1 to type 2 charging cable6

Product introduction

Materials
Shell Material: Thermal Plastic ( Insulator inflammability UL94 VO)
Contact Pin: Copper alloy, silver or nickel plating
Sealing gasket: rubber or silicon rubber

Better Conductivity
The silver plating on the pins makes better conductivity, higher charging efficiency, and effectively reduces heat generation.

Arcing Design
The special "self-clean" design. The impurities on the surface of the pins can be removed in each plug-in process. It could also effectively reducing the generation of the electric sparks.

Integrated Design
The plug adopts an advanced integrated design without any screw fixation. The waterproof performance is also higher compared with normal two-piece design or screw-fixed plugs. High safety level IK10 can protect the plug against the impacts of the car.

Temperature Monitoring
The monitor system on plug (patented) is sensitive to changes in temperature. Once it detects the temperature is higher than the set safe value, current will be automatically cut off.

Ergonomic Design
The body design of the plug has a small angle horizontal bending. It is in the line with the habit of manual force and more convenient to plug an unplug.

Tech specs

Input power 1-phase, 220-250V/AC, 16A
Rated current 32A
Working Voltage 240V
Application standard IEC 62196 Type2 SAE J1772 Type 1
Plug shell material Thermoplastic (flame retardant grade: UL94-0)
Operational temperature -30 °C to +50 °C
Vandalism-proof No
UV resistant Yes
Certificate CE, TUV
Cable length 5m or customized
Terminal material Copper alloy, silver plating
Terminal temperature rise <50k
Withstand voltage 2000V
Contact resistance ≤0.5mΩ
Mechanical life >10000 times of off-load plug in/out
Coupled insertion force Between 45N and 100N
Withstandable impact Dropping from a 1m height and running-over by a 2-ton vehicle
Warranty 2 years

  • Previous:
  • Next:

  • Write your message here and send it to us